Blue cleaning pads for floor machines

Blue cleaning pads for floor machine 175-350 RPM by iNO Solutions

Blue cleaning floor pads by iNO Gloss Pads are primarly used to remove old soiled layers of floor finish, dirt and scratches when used with a neutral floor cleaner. These floor pads can also be used to clean other hard surfaces such as concrete and cement when used with a proper cleaning solution. iNO Solution's blue cleaning floor pads can be used with all types of low-speed floor machines of speed of up to 350 RPM. Both sides of these floor pads can be used to increase the products life.

Directions for use

1. Clean the floor using a dust mop or broom before usage
2. Use the blue cleaning floor pad with a neutral cleaner solution until the soiled finish and dirt are removed from the floor.
3. Remove the cleaning solution using a mop, wet vacuum or automatic scrubber.
4. Rinse the floor with water and allow to dry.
5. Use a polishing or burnishing floor pad to obtain a high gloss finish
6. Clean the floor pad using a water spray nozzle to increase the its utility life. To dissolve heavy soil or finish this pad may be soaked in detergent or diluted stripping solution prior to washing.
7. Allow the stripping floor pad to dry before it's next use

Specifications

Environmental Initiatives

• Polyester fiber used in the blue floor cleaning pads come from 100% post-consumer and industrial recycled waste products.
• Full Cycle product, formulated to biodegrade in a fraction of the time that it takes conventional floor pads once discarded into an active landfill.
• Water based latex resins are used in the manufacturing process. No phenol-formaldehyde resins are used in the binding process of the iNO blue floor pads.
• Shipping cartons are composed of at least 45% recycled materials.
• The manufacturing plant is operating under EPA approved Clean Air Permit.