Aqua burnishing pads for floor machines

Aqua ultra-high speed burnishing pads for floor machines 1500-3000 RPM by iNO Gloss Pads

The Aqua burnishing floor pads from iNO Gloss Pads are ideal for a high frequency maintenance on soft to medium floor finishes. These floor pads are use to obtain a high gloss from the floor finish. These burnishing pads can be used with all types of floor machines from polisher to auto-scrubber that use discs pads with a recommended speed of 1500 to 3000 RPM. They are made of 100% post-consumation recycled polyester and a water-based latex resin with a non-wooven textured finish. These floor pads can be used both sizde to increase their usable life.

Directions of use

1. Clean debris from the floor using a dust mop
2. Use the pad until the wanted floor finish is obtained
3. Clean the debris caused from the burnishing using a dust mop
4. Clean the pad using a water spray nozzle to increase the utility life of the floor pad
5. Allow the burnishing floor pad to dry before it's next use

Specifications

Environmental Initiatives

• Polyester fiber used in the aqua floor pads come from 100% post-consumer and industrial recycled waste products.
• Full Cycle product, formulated to biodegrade in a fraction of the time that it takes conventional floor pads once discarded into an active landfill.
• Water based latex resins are used in the manufacturing process. No phenol-formaldehyde resins are used in the binding process of the iNO aqua floor pads.
• Shipping cartons are composed of at least 45% recycled materials
• The manufacturing plant is operating under EPA approved Clean Air Permit.